Rotary Torque Sensor

TSR-09

This type of torque sensor can be mounted directly with a rotating shaft.

TSR-09 rotary torque sensor or transducer with bellow couplings can be used in any mounting position like horizontal, vertical or oblique. With vertical or oblique operation, please ensure that additional masses are sufficiently supported.

Features:

– Nominal torques (rated): 0.1Nm, 0.2Nm, 0.5Nm, 1Nm, 2Nm, 5Nm, 10Nm, 20Nm, 50Nm, 100Nm, 200Nm.

– Accuracy Class: 0.2

– Contactless transmission of the measurement signal

– Measurement on rotating and stationary parts

– Cylindrical shaft ends for non play friction joints.

– Integrated measuring system for speed and angle of rotation

– Torque output signal: 0-10VDC

General Notes:

• Install the shafts in the coupling hubs before fastening the couplings clamping screws
• Do not stretch the bellow couplings beyond the specified permissible elasticities
• The input and output shafts must be free from grease and burrs
• The shaft diameters should be made with a j6 tolerance to obtain the H7/j6 Preference fit

---